F態鋁板
F-state aluminum plate
F狀態又被稱為隨意生產加工狀態，F態鋁板的機械設備有機化學性能并沒有明文規定，購置F狀態鋁板的顧客一般對鋁板的性能有特別要求。購置后，她們將開展需要的生產加工、硬底化和熱處理工藝，以獲取所需要的結構力學和有機化學性能。
The F state is also known as the free production and processing state. The organic chemical properties of the mechanical equipment of the F state aluminum plate are not clearly specified. Customers who purchase the F state aluminum plate generally have special requirements for the performance of the aluminum plate. After purchase, they will carry out the required production and processing, hard bottom and heat treatment processes to obtain the required structural mechanics and organic chemical properties.
O態鋁板
O-state aluminum plate
O狀態又被稱為大部分淬火狀態，O并沒有細分化狀態，就是指僅有大部分淬火才可以得到zui少抗壓強度的鋁板商品。
The O state is also known as the most quenched state. O has no finely differentiated state, which means that only most quenched aluminum products with low compressive strength can be obtained.
H態鋁板
H-state aluminum plate
H狀態又被稱為冷作硬化狀態，代表加工硬化后抗壓強度提升的鋁板。H狀態有很多細分化狀態，如H18態，1和8，di一個數據代表工藝處理:1是冷作硬化，2是生產后不大部分淬火，3是生產后超低溫淬火；第二個數據代表強度:1-8，1，8。

The H state is also known as the cold work hardening state, which represents the aluminum plate with improved compressive strength after work hardening. The H state has many finely differentiated states, such as H18 state, 1 and 8, di. One data represents process processing: 1 is cold work hardening, 2 is not most quenching after production, 3 is ultra-low temperature quenching after production; The second data represents strength: 1-8, 1, 8.
T態鋁板
T-shaped aluminum plate
T狀態就是指鋁板的熱處理工藝狀態，表明鋁板冷作硬化后平穩。T狀態有細分化狀態，代表不一樣的工藝處理，狀態從T0一直到T10。T態中，Tx51代表清除熱應力，如T6狀態，清除熱應力后，表明為T(mén)651。
T state refers to the heat treatment process state of aluminum plate, indicating that the aluminum plate is stable after cold work hardening. The T state has a finely differentiated state, representing different process treatments, from T0 to T10. In the T state, Tx51 represents the removal of thermal stress. For example, in the T6 state, after the removal of thermal stress, it indicates T651.
W態鋁板
W-state aluminum plate
W狀態就是指熱處理回火熱處理工藝狀態，W狀態不穩定，表明鋁板熱處理回火后處在常溫下的當然時效性，W狀態只代表著鋁板處在當然時效性環節。
The W state refers to the heat treatment, tempering and heat treatment process state. The W state is unstable, indicating that the aluminum plate is in the natural aging at normal temperature after heat treatment and tempering. The W state only represents that the aluminum plate is in the natural aging link.
有了鋁板生產廠家上面的小總結，希望對廣大客戶有所幫助，如果有什么不理解的或者尋求幫助的請點擊我們的網站：http://www.gytimber.com或者來電咨詢，我們會(huì )盡全力為您
With the summary of the aluminum plate manufacturer above, I hope it can help our customers. If you have any questions or need help, please click our website: http://www.gytimber.com Or call to inquire, we will do our best for you