1、 粘結性能穩定牢固耐久：
1. The bonding performance is stable and durable.
鋁質瓦楞板采用AL3003H16-H18材料，面板厚度為0.7mm~1 .0mm,背板厚度為0.5 - 1mm(與鋁質蜂窩板相同），芯板采用AL3003H16-H18,材料厚度為0.2mm、0.25mm，0.3mm,是水波紋型，與面板背板粘結面為弧型，增大了粘結強度，利用熱硬化性樹脂粘合劑具有金屬板的粘合力，在的全自動化生產設備上生產，確保粘結性能穩定牢固耐久與建筑同壽命。
Aluminum corrugated plate made of AL3003H16-H18 material, the panel thickness is 0.7mm~1.0mm, backplane thickness of 0.5 - 1mm (with the same aluminum honeycomb board), using the AL3003H16-H18 core board, material thickness was 0.2mm, 0.25mm, 0.3mm, water ripples, and the panel back bonding surface of arc, increasing the bonding strength, using heat hardening resin adhesive with excellent adhesion to metal plates, in the production of advanced automatic production equipment, ensure durable and stable performance of building bond with life.
2、節能環保：
2. Energy conservation and environmental protection:
鋁質瓦楞板的芯板是水波紋型，在面板和背板之間組成了空氣通道，是中空板系統，是隔熱保溫的較佳產品。在太陽輻射的作用下，通道中的空氣升溫向上流動帶走熱量，具有隔熱性能。在寒冷地區，將瓦楞通道上下端密封，白天在陽光照射下，儲存熱能減少室內采暖熱量的流失，具有保溫性能。工程中余料可回收，環保無污染。
The core plate of the aluminum corrugated board is a water wave pattern. The air channel is formed between the panel and the back plate. It is a hollow plate system. It is the best product of heat insulation and heat preservation. Under the action of solar radiation, the air in the channel is heated up to take away the heat and has the heat insulation performance. In cold areas, the sealing of the upper and lower end of the corrugated channel, the daytime irradiation under the sunlight, the storage of heat energy to reduce the loss of indoor heating heat, and has the thermal insulation performance. The remainder in the project can be recovered , and the environmental protection is no pollution.

3、隔聲降噪：
3, sound insulation and noise reduction:
由于芯板是瓦楞弧型，對聲波產生曲面反射，消除面板與背板之間的聲波耦合，提高隔聲性能大于35dB。
Because the core plate is a corrugated arc, it reflects the surface of the sound wave and eliminates the sound wave coupling between the panel and the back plate, and improves the sound insulation performance of more than 35dB.
4、超高的平整度：
4. Ultra high evenness:
鋁質瓦楞板由于鋁面板的厚度為0.7--1.0mm,折邊后承載能力較小，不宜用于大板塊或大高度幕墻工程。鋁單板由于線膨脹系數為2.35x10-5,冷縮熱脹變形較大，一般使用1-2年后鋁板表面產生凹凸變形,影響建筑外立面的藝術性。蜂窩板外表面的平整度較好，但價格較高不宜被工程采用。鋁質瓦楞板的拉伸、壓縮強度，180度剝離強度(詳見檢測報告）高于蜂窩板，故具有超高的表面平整度，穩定耐久與建筑同壽命。
Aluminum corrugated board is not suitable for large plate or large height curtain wall engineering because the thickness of aluminum plate is 0.7--1.0mm and the bearing capacity is small after folding. Because the linear expansion coefficient is 2.35x10-5, the aluminum sheet has large shrinkage and thermal expansion deformation. After 1-2 years, the concave and convex deformation on the surface of the aluminum plate affects the artistry of the fa ade. The flatness of the outer surface of the honeycomb plate is better, but it is not suitable to be used by the project. The tensile and compressive strength of aluminum corrugated board, 180 degree peel strength (see the report) is higher than that of honeycomb panel, so it has super high surface smoothness, stability and durability, and the same life of building.
5、重量輕，具有經濟性：
5. Light weight and economical:
鋁質瓦楞板6mm厚時，比重為4.3kg/㎡由于面材重荷載小，而結構支承龍骨可減少，更具有經濟性。
Aluminum corrugated board thickness of 6mm, the proportion of 4.3kg/ square meters due to surface heavy load is small, and the structure of bearing keel can be reduced, more economical.
6、易清洗、耐腐蝕、防污能力強、耐久不變色。
6, Yi Qingxi, corrosion resistance, antifouling ability, durable discoloration.
7、加工安裝簡便：
7. The processing and installation are simple and convenient:
易加工：可切割、打孔、折彎，可制成異型平板、弧型板。邊肋、加強中助可用拉鉚釘連接，簡便牢固。
Easy to process: cutting, drilling, bending, can be made into flat plate, arc plate. The edge ribs and reinforcing help can be connected with the pull rivet, which is simple and firm.
易安裝施工：可采用定距壓接、掛接、開縫、閉縫結構，確保表面平整，安全耐久，更具有建筑藝術
Easy installation construction: the structure of fixed distance pressing, hanging, seams and closed seams can be adopted to ensure smooth surface, safety and durability, and more architectural art.
本文的精彩內容由鋁卷生產廠家進行編寫，本公司堅持以誠信合作的共贏理念，為您提供完善的服務，歡迎點擊進入：http://www.gytimber.com。
The excellent content of this paper is written by the aluminum coil manufacturer. Our company adheres to the idea of win-win cooperation with sincerity and cooperation, and provides you with perfect service. Welcome to click in: http://www.gytimber.com.